A realtime depolarization strategy is put forward that takes polarization voltage and soc as inputs , and the width of depolarization pulse , revised by solution temperature , as output 提出了以蓄電池極化電壓和蓄電池的荷電狀態為輸入變量,以去極化脈沖的寬度作為輸出并根據蓄電池電解液溫度進行修正的實時去極化策略。
Abstract : on the basis of the theory of controlled phase - changes of piezoceramics , high - temperature polarizing technology makes initial working temperature a little higher than curie temperature of a sample , but the polarization voltage needed is greatly lower than the one needed in normal polarization ( only 1 / 10 - 1 / 5 ) . the improved polarizing technology can make polarization more complete 文摘:壓電陶瓷的高溫極化是利用受控的場致有序化的順電鐵電相變原理,使起始極化溫度略高于樣品的居里溫度,但所需的極化電壓大大低于常規極化,僅為1 / 10 - 1 / 5 ;選擇較高的降溫升壓速率,可使極化趨于更加完全,具有常規極化工藝無可比擬的優越性。
The lead zirconate titanate ( pzt ) / polymer composite presented large tan5 and dynamic modulus when the composites were exposed to higher polarization voltage and longer polarization time , because of the uniform dispersion of ceramic in polymer matrix and the strong interaction between grain and polymer . the morphology of the composites , namely the degree of the grains dispersion in polymer , can be observed through scanning electric microscope ( sem ) 顆粒結構性高的壓電陶瓷,其復合體系內耗大;在高極化電壓、長極化時間下,壓電陶瓷顆粒在聚合物中分散比較均勻,與聚合物接觸面大,相互間作用強;在外力作用時,體系tanb 、 g , , g ?呈現大的值。